ADTRAN AOS Version R10.1.0 Command Reference Manual page 3743

Command Reference Guide Voice User Account Command Set
plc
Use the plc command to enable packet loss concealment (PLC). PLC is used to prevent choppy
connections by concealing a packet loss by replacing the lost packet with another voice packet in the data
stream. Use the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Values
By default, PLC is enabled.
Command History
Release 11.1 Command was introduced.
Usage Examples
The following example disables PLC for user 4444:
(config)#voice user 4444
(config-4444)#no plc
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 3743