ADTRAN AOS Version R10.1.0 Command Reference Manual page 3790

Command Reference Guide
max-number-calls <number>
Use the max-number-calls command to define the maximum number of calls allowed in the call queue.
Use the no version of this command to restore the system default.
Syntax Description
<number>
Default Values
By default, 16 calls are allowed in the call queue.
Command History
Release A4.01
Usage Examples
The following example sets the maximum number of calls allowed in the queue to 10:
(config)# voice queue 6407
(config-6407)#max-number-calls 10
60000CRG0-35E
Specifies the maximum number of calls allowed in the call queue. The
range for this command is dependent upon the NetVanta unit and will be
reflected in an error message if the range is exceeded.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Voice Call Queuing Command Set
3790