Table of Contents
Advertisement
Command Reference Guide
Voice CoS Command Set
system-speed
Use the system-speed command to enable system speed dial usage for the system. Use the no form of this
command to disable the system speed setting.
Syntax Description
No subcommands.
Default Values
By default, system-speed is enabled.
Command History
Release 11.1
Command was introduced.
Usage Examples
The following example enables configuration of the system speed in rule set set1:
(config)#voice class-of-service set1
Configuring Existing Level "set1".
(config-cos-set1)#system-speed
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
3840
Advertisement
Table of Contents
