Table of Contents
Advertisement
Command Reference Guide
set session-key
Use the set session-key command to define the encryption and authentication keys for this crypto map.
Use the no form of this command to remove defined encryption and authentication keys. Variations of this
command include the following:
set session-key inbound ah <SPI> <key>
set session-key inbound esp <SPI> authenticator <key>
set session-key inbound esp <SPI> cipher <key>
set session-key inbound esp <SPI> cipher <key> authenticator <key>
set session-key outbound ah <SPI> <key>
set session-key outbound esp <SPI> authenticator <key>
set session-key outbound esp <SPI> cipher <key>
set session-key outbound esp <SPI> cipher <key> authenticator <key>
Syntax Description
inbound
outbound
ah <SPI>
esp <SPI>
cipher <key>
authenticator <key>
Default Values
No default values are necessary for this command.
Command History
Release 4.1
Functional Notes
The inbound local SPI must equal the outbound remote SPI. The outbound local SPI must equal the
inbound remote SPI. The key values are the hexadecimal representations of the keys. They are not true
ASCII strings. Therefore, a key of 3031323334353637 represents 01234567.
60000CRG0-35E
Defines encryption keys for inbound traffic.
Defines encryption keys for outbound traffic.
Specifies Authentication Header (AH) Protocol and security parameter
index (SPI).
Specifies Encapsulating Security Payload (ESP) Protocol and SPI.
Optional. Specifies encryption/decryption key.
Optional. Specifies authentication key.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Crypto Map Manual Command Set
3938
Advertisement
Table of Contents
