Vqm Reporter Command Set - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide
VQM R
EPORTER
Voice quality monitoring (VQM) allows real time passive Voice over IP (VoIP) quality measurements to
be taken on all Realtime Transport Protocol (RTP) voice streams transmitted through an AOS device. The
VQM reporter is a feature supported by AOS devices that allows the gathered VQM statistics to be
aggregated by third-party collectors, such as the n-Command
Allowing aggregation by the n-Command MSP server provides more flexibility in monitoring voice
networks.
VQM should be enabled and configured on the AOS device before configuring the VQM reporter. For
information on configuring VQM, refer to the Voice Quality Monitoring configuration guide available on
the CD shipped with your product or online at
VQM commands are also detailed in the
with the command ip rtp quality-monitoring on page
To create a VQM reporter and enter the reporter's configuration mode, enter the ip rtp
quality-monitoring reporter <name> command from the Global Configuration mode prompt. For
example:
>enable
#configure terminal
(config)#ip rtp quality-monitoring reporter Reporter1
(config-rtp-reporter-Reporter1)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the section listed below:
cross-connect on page 67
description <text> on page 70
do on page 71
exit on page 73
shutdown on page 82
All other commands in this command set are described in this section in alphabetical order:
collector on page 3886
domain <name> on page 3888
grammar from on page 3889
grammar request-uri on page 3890
grammar to on page 3892
ipv6 policy-class <ipv6 acp name> max-sessions <number> on page 3893
max-queue-depth <value> on page 3894
max-retries <value> on page 3895
outbound-proxy on page 3896
60000CRG0-35E
C S
OMMAND ET
https://supportforums.adtran.com
Global Configuration Mode Command Set on page 852
Copyright © 2012 ADTRAN, Inc.

VQM Reporter Command Set

managed service provider (MSP) server.
®
1084.
(article number 2262).
beginning
3885