ADTRAN AOS Version R10.1.0 Command Reference Manual page 3827

Command Reference Guide Voice CoS Command Set
overhead-paging
Use the overhead-paging command to allow the user to connect to overhead paging using a special prefix
(SPRE) code. Use the no form of this command to deny the ability to connect to overhead paging.
Syntax Description
No subcommands.
Default Values
By default, the ability to connect to overhead paging is denied.
Command History
Release 12.1 Command was introduced.
Usage Examples
The following example allows the user in rule set set1 to connect to overhead paging:
(config)#voice class-of-service set1
Configuring Existing Level "set1".
(config-cos-set1)#overhead-paging
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 3827