Table of Contents
Advertisement
Command Reference Guide
reject <template>
Use the reject command to specify a number pattern to match to a user ID for rejection from the SIP Proxy
user database. If a match is successful, SIP messages are rejected for the matching user. Use the no form of
this command to remove a configured template entry from the proxy user template.
AOS will process the reject patterns before the accept patterns, regardless of the order they
appear in the configuration of the proxy user template. Refer to
page 3866
Syntax Description
<template>
Default Values
No default values are necessary for this command.
Command History
Release A4.01
Functional Notes
The available wildcards for this command are:
0-9 = Match exact digit only.
X = Match any single digit 0 through 9.
N = Match any single digit 2 through 9.
M = Match any single digit 1 through 8.
$ = Match any number string dialed.
[ ] = Match any digit contained in the bracketed list (for example: [146] will match 1, 4, or 6).
Rules:
The following rules apply to the number templates.
1. Any open bracket must have a corresponding closing bracket to complete the statement.
2. Use only numbers inside brackets. Do not use dashes, spaces, wildcards, or other special characters
inside the brackets. Commas can be used in the brackets but are ignored.
3. Bracketed lists cannot be nested.
4. The $ wildcard can only be used as the last character in a template.
Examples:
1) 1234
2) 555-81XX
3) 555-812[012]
60000CRG0-35E
for additional information.
Specifies the patterns to match a proxy user and reject the user as an entry
to the SIP proxy user database. You can enter a complete phone number,
or wildcards can be used to help define rejected numbers. Refer to
Functional Notes below for more information on using wildcards.
Command was introduced.
matches 1234 exactly.
matches 555-8100 to 555-8199.
matches 555-8120 to 555-8122.
Copyright © 2012 ADTRAN, Inc.
Proxy User Template Command Set
accept <template> on
3872
Advertisement
Table of Contents
