Ca Profile Command Set - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide
CA P C
ROFILE
To activate the Certificate Authority (CA) Profile Configuration mode, enter the crypto ca profile
command at the Global Configuration mode prompt. For example:
>enable
#configure terminal
(config)#crypto ca profile MyProfile
Configuring New CA Profile MyProfile
(ca-profile)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
cross-connect on page 67
do on page 71
end on page 72
exit on page 73
interface on page 74
All other commands for this command set are described in this section in alphabetical order.
crl optional on page 3900
email address <address> on page 3901
enrollment retry on page 3902
enrollment terminal on page 3903
enrollment url <url> on page 3904
fqdn <name> on page 3905
ip-address <ipv4 address> on page 3906
ipv6 policy-class <ipv6 acp name> max-sessions <number> on page 3907
password <password> on page 3908
serial-number on page 3909
subject-name <name> on page 3910
60000CRG0-35E
S
OMMAND ET
Copyright © 2012 ADTRAN, Inc.

CA Profile Command Set

3899