ADTRAN AOS Version R10.1.0 Command Reference Manual page 3744

Command Reference Guide Voice User Account Command Set
remote-phone
Use the remote-phone command to specify using the source IPv4 address and port for routing rather than
the Contact address specified in the SIP messaging. Enabling this feature also enables media anchoring for
the voice user. Use the no form of this command to disable the settings.
Syntax Description
No subcommands.
Default Values
No default values are necessary for this command.
Command History
Release R10.1.0 Command was introduced.
Usage Examples
The following example configures the voice user for extension 4444 as a remote phone:
(config)#voice user 4444
(config-4444)#remote-phone
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 3744