ADTRAN AOS Version R10.1.0 Command Reference Manual page 3797

Command Reference Guide Voice Call Queuing Command Set
ringback-only
Use the ringback-only command to set the call queue to ringback-only mode. Queued calls will hear only
ringback instead of hold music and greetings, conserving system resources. Use the no version of this
command to disable this feature.
Syntax Description
.
No subcommands
Default Values
By default, the ringback-only mode is disabled and the full-featured queue is available.
Command History
Release A4.01 Command was introduced.
Usage Examples
The following example sets the call queue to ringback only mode:
(config)# voice queue 6407
(config-6407)#ringback-only
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 3797