Creating Classifier Control Lists For Policies; Classifier Control Lists Overview; Creating Or Modifying Classifier Control Lists For Atm Policy Lists; Creating Or Modifying Classifier Control Lists For Frame-Relay Policy - Juniper POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X Configuration Manual

Chapter 2
Creating Classifier Control Lists for
Policies

Classifier Control Lists Overview

This chapter provides information for configuring policy-based routing management
on E Series routers. See the E120 and E320 Module Guide for modules supported on
the E120 and E320 Broadband Services Routers. The chapter discusses the following
topics:
Classifier Control Lists Overview on page 7
Creating or Modifying Classifier Control Lists for ATM Policy Lists on page 10

Creating or Modifying Classifier Control Lists for Frame-Relay Policy

Lists on page 10
Creating or Modifying Classifier Control Lists for GRE Tunnel Policy
Lists on page 10
Creating or Modifying Classifier Control Lists for IP Policy Lists on page 11
Creating or Modifying Classifier Control Lists for IPv6 Policy Lists on page 14
Creating or Modifying Classifier Control Lists for L2TP Policy Lists on page 14
Creating or Modifying Classifier Control Lists for MPLS Policy Lists on page 14
Creating or Modifying Classifier Control Lists for VLAN Policy Lists on page 15
Classifier control lists (CLACLs) specify the criteria by which the router defines a
packet flow. Table 3 on page 7 lists the criteria that you can use to create CLACLs
for different types of traffic flows.

Table 3: CLACL Criteria

Type of CLACL Criteria
ATM CLP
Color
Traffic class
User packet class
Classifier Control Lists Overview
7