Table of Contents
Advertisement
frame-relay lmi-type
Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
frame-relay lmi-type type
no frame-relay lmi-type
Command introduced before JunosE Release 7.1.0.
Selects the LMI type. The no version restores the default value.
type—One of the following types:
ansi—ANSI T1.617 Annex D
cisco—Original Group of Four specification developed by DEC, Northern Telecom,
Stratacom, and Cisco
q933a—ITU-T Q.933 Annex A
none—No management interface is used
Interface Configuration
Configuring Frame Relay Layer 2 Services in the JunosE BGP and MPLS Configuration
Guide
Chapter 7: F Commands
649
Advertisement
Table of Contents
