Atm Atm1483 Subscriber - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

atm atm1483 subscriber

atm atm1483 subscriber upperInterfaceType { user | user-prefix } userName
Syntax
domain domainName [ { password | password-prefix }
password ] [ no-authenticate ]
no atm atm1483 subscriber upperInterfaceType
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures a local subscriber (when one cannot be obtained externally, as in PPP)
Description
for a dynamic upper interface encapsulation type configured over a dynamic ATM
1483 subinterface. A subscriber supports authentication and configuration from the
RADIUS server. The no version removes the subscriber.
Options
Profile Configuration
Mode
upperInterfaceType One of the following dynamic encapsulation types:
bridgedEthernet
ip
user Employs the username as specified
user-prefix Appends the interface physical location to the username
userName RADIUS username
domainName Domain name
password Employs the password as specified
password-prefix Appends the interface physical location to the password
password RADIUS password
no-authenticate Disables authentication
Chapter 2: A Commands
atm atm1483 subscriber
159