Atm Classifier-List - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

atm classifier-list

atm classifier-list classifierName [ traffic-class trafficClassName ]
Syntax
[ color { green | yellow | red } ] [ user-packet-class userPacketClassValue ]
[ clp clpValue ]
no atm classifier-list classifierName [ classifierNumber ]
Command introduced in JUNOSe Release 7.1.0.
Release Information
Creates a classifier control list that can only be used in ATM policy lists. The no
Description
version removes the ATM classifier control list. ATM packets are classified on CLP.
The CLP bit is not available on frame-based interfaces on E Series Broadband Services
Router line modules.
Options
Global Configuration
Mode
Related Topics
classifierName Name of the classifier control list entry
trafficClassName Name of the traffic class to match
green Matches packet color to green, indicating a low drop preference
yellow Matches packet color to yellow, indicating a medium drop preference
red Matches packet color to red, indicating a high drop preference
userPacketClassValue User packet value to match in the range 0–15
clpValue Value of the CLP, 0 or 1
classifierNumber Index of the classifier control list entry to be deleted
Creating or Modifying Classifier Control Lists for ATM Policy Lists
Chapter 2: A Commands
167
atm classifier-list