Atm Ilmi-Keepalive - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

atm ilmi-keepalive

[ no ] atm ilmi-keepalive [ seconds ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables generation of ILMI keepalive messages on the router, affecting the operational
Description
state of the ATM interface. The no version disables the generation of keepalive
messages.
Options
Interface Configuration
Mode
174
atm ilmi-keepalive
seconds Number in the range 0–4294967295; the interval in seconds between
two consecutive ILMI keepalive requests