Frame-Relay Lmi-N393Dte - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
frame-relay lmi-n393dte
Syntax
Release Information
Description
Options
Mode
646
frame-relay lmi-n393dte events
no frame-relay lmi-n393dte
Command introduced before JunosE Release 7.1.0.
Sets the monitored event count (N393) on a DTE interface. The no version removes
current setting and sets the default.
events—Number in the range 1–10 events; default value is 4 events; specifies the
diagnostic window used to verify link integrity (the detection of N392 errors within the
window of N393 samples places the interface in an operationally down state)
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers