Frame-Relay Lmi-N392Dce - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
frame-relay lmi-n392dce
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
frame-relay lmi-n392dce threshold
no frame-relay lmi-n392dce
Command introduced before JunosE Release 7.1.0.
Sets the error threshold counter (N392) on a DCE interface. The no version removes
current setting and sets the default.
threshold—Positive number in the range 1– 10; number of errors that will place the
interface in an operationally down state; default value is 2 errors
Interface Configuration
Chapter 7: F Commands
643
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers