Table 5: Ascend-Data-Filter Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE 2010-10-04 Configuration Manual

Table 5: Ascend-Data-Filter Fields

Action or Classifier
Type
Filter or forward
Indirection
Spare
Source IP address
Destination IP address
Source IP prefix
Destination IP prefix
Protocol
Established
Source port
Destination port
Source port qualifier
Copyright © 2010, Juniper Networks, Inc.
Format Comments
1 byte 1=IPv4
3=IPv6
1 byte 0=filter
1=forward
1 byte 0=egress
1=ingress
1 byte -
4 bytes for IPv4 -
16 bytes for IPv6
4 bytes for IPv4 -
16 bytes for IPv6
1 byte Type 1 = Number of leading zeros in the wildcard mask
Type 3 = Higher-order contiguous bits of the address that comprise
the network portion of the address
1 byte Type 1 = Number of leading zeros in the wildcard mask
Type 3 = Higher-order contiguous bits of the address that comprise
the network portion of the address
1 byte -
1 byte Non implemented
2 bytes -
2 bytes -
1 byte 0= no compare
1= less than
2= equal to
3= greater than
4= not equal to
Chapter 4: Creating Classifier Groups and Policy Rules
43