Bgp Default Route-Target Filter - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

bgp default route-target filter

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] bgp default route-target filter
Command introduced before JunosE Release 7.1.0.
Controls whether incoming BGP routes are filtered according to membership in
route-target communities. Automatic filtering is enabled by default. The no version
disables automatic filtering.
Router Configuration
Chapter 3: B Commands
285