Baseline Ipv6 Local Pool - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

baseline ipv6 local pool

Syntax
Release Information
Description
Mode
246
baseline ipv6 local pool
Command introduced in JunosE Release 10.1.0.
Sets a baseline for the IPv6 local pool prefix assignment statistics. The router implements
the baseline by reading and storing the statistics at the time the baseline is set and then
subtracting this baseline whenever baseline-relative statistics are retrieved. There is no
no version.
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.