Show Ipv6 Local Pool - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show ipv6 local pool

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show ipv6 local pool [ poolName | statistics [ delta ] ] [ filter ]
Command introduced in JunosE Release 10.1.0.
Displays information for all IPv6 local address pools configured on a virtual router, a
particular IPv6 local address pool, or the IPv6 local address pool statistics for DHCPv6
prefix delegation.
poolName—Name of the IPv6 local address pool configured on the virtual router for
which you want to view statistics, such as the number of clients to which prefixes have
been allocated from this pool, starting and ending prefixes of the address range, and
other prefix configuration parameters .
statistics—Displays the IPv6 local address pool statistics details.
delta—Displays statistics that have changed since the last baseline was set.
filter—See "Filtering show Commands" on page 4.
Privileged Exec, User Exec
Chapter 7: S Commands
909