Troubleshooting Acl; Acl Application Failure With An Error Message; Symptom; Troubleshooting Flowchart - H3C S5560-EI Series Troubleshooting Manual

Troubleshooting ACL

This section provides troubleshooting information for common problems with ACLs.

ACL application failure with an error message

Symptom

The system fails to apply a packet filter or an ACL-based QoS policy to the hardware. It also displays the
"Reason: Not enough hardware resource" message.

Troubleshooting flowchart

Figure 5 Troubleshooting an ACL application failure

Solution

To resolve the problem:
1. Execute the display qos-acl resource command, and then check the Remaining field for ACL
resources insufficiency.
If this field displays 0, the ACL hardware resources are exhausted.
2. To free hardware resources, delete unnecessary ACLs.
3. If the problem persists, contact H3C Support.
11