Display Fib Acl - H3C S3100-52P Command Manual

Command Manual – IP Address and Performance Configuration
H3C S3100-52P Ethernet Switch
Example
# View the FIB entries whose destination addresses match 12.158.10.0 in the natural
mask range.
<H3C> display fib 12.158.10.0
Route Entry Count: 1
Flag:
U:Usable
R:Reject
Destination/Mask
12.158.10.0/24
# Display the FIB entries whose destination addresses are in the range of
12.158.10.0/24 to 12.158.10.6/24.
<H3C> display fib 12.158.10.0 255.255.255.0 12.158.10.6 255.255.255.0
Route Entry Count: 1
Flag:
U:Usable
R:Reject
Destination/Mask
12.158.10.0/24
For details about the displayed information, see Table 2-1.

2.1.3 display fib acl

Syntax
display fib acl number
View
Any view
Parameter
number: ACL in the number form, in the range of 2000 to 2999.
Description
Use the display fib acl command to view the FIB entries matching a specific ACL. For
ACL, refer to the ACL part of this manual.
Example
# View all the FIB entries.
<H3C> display fib
Flag:
U:Usable
G:Gateway H:Host
E:Equal cost multi-path
Nexthop
12.158.10.1
G:Gateway H:Host
E:Equal cost multi-path
Nexthop
12.158.10.1
G:Gateway H:Host
2-3
Chapter 2 IP Performance Configuration
B:Blackhole D:Dynamic
L:Generated by ARP or ESIS
Flag TimeStamp
U t[85391]
B:Blackhole D:Dynamic
L:Generated by ARP or ESIS
Flag TimeStamp
U t[85391]
B:Blackhole D:Dynamic
Commands
S:Static
Interface
Vlan-interface10
S:Static
Interface
Vlan-interface10
S:Static