Ppp Ipcp Dns Request; Ppp Ipcp Remote-Address Match - H3C MSR810 Command Reference Manual

Related commands

ppp ipcp dns request

ppp ipcp dns request
Use ppp ipcp dns request to enable an interface to actively request the DNS server IP address
from its peer.
Use undo ppp ipcp dns request to restore the default.
Syntax
ppp ipcp dns request
undo ppp ipcp dns request
Default
An interface does not actively request the DNS server IP address from its peer.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
If a device is connected to a provider's access server through a PPP link, you can use this command.
Then, the device can obtain the specified DNS server IP address from the access server during IPCP
negotiation.
You can check the DNS server IP addresses by displaying information about the interface.
Examples
# Enable Serial 2/1/0 to actively request the DNS server IP address from its peer.
<Sysname> system-view
[Sysname] interface serial 2/1/0
[Sysname-Serial2/1/0] ppp ipcp dns request

ppp ipcp remote-address match

Use ppp ipcp remote-address match to enable the IP segment match feature for PPP IPCP
negotiation on an interface.
Use undo ppp ipcp remote-address match to restore the default.
Syntax
ppp ipcp remote-address match
undo ppp ipcp remote-address match
Default
The IP segment match feature is disabled for PPP IPCP negotiation on an interface.
Views
Interface view
Predefined user roles
network-admin
23