ADTRAN AOS Version R10.1.0 Command Reference Manual page 3952

Command Reference Guide
hash
Use the hash command to specify the hash algorithm to be used to authenticate the data transmitted over
the Internet key exchange (IKE) security association (SA). Use the no form of this command to return to
the default setting. Variations of this command include:
hash md5
hash sha
Syntax Description
md5
sha
Default Values
By default, hash is set to sha.
Command History
Release 4.1
Usage Examples
The following example specifies md5 as the hash algorithm:
(config-ike)#attribute 10
(config-ike-attribute)#hash md5
60000CRG0-35E
Choose the message digest 5 (MD5) hash algorithm.
Choose the SHA hash algorithm.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
IKE Policy Attributes Command Set
3952