ADTRAN AOS Version R10.1.0 Command Reference Manual page 3944

Command Reference Guide
dns-server
Use the dns-server command to specify the default primary and secondary domain naming system (DNS)
servers to use for the Dynamic Host Configuration Protocol (DHCP) client. Use the no form of this
command to remove the configured DNS server. Variations of this command include:
dns-server <ip address>
dns-server <ip address> <secondary>
Syntax Description
<ip address>
<secondary>
Default Values
By default, there are no specified default DNS servers.
Command History
Release 2.1
Release 4.1
Usage Examples
The following example specifies a default DNS server with address 192.72.3.254 and a secondary DNS
server with address 192.100.4.253:
(config)#crypto ike client configuration pool ConfigPool1
(config-ike-client-pool)#dns-server 192.72.3.254 192.100.4.253
60000CRG0-35E
Specifies the IP address of the preferred DNS server on the network.
Optional. Specifies the IP address of the second preferred DNS server on
the network.
IP addresses should be expressed in dotted decimal notation (for example,
10.10.10.1).
Command was introduced.
Command was expanded to include the Internet key exchange (IKE) client
configuration pool.
Copyright © 2012 ADTRAN, Inc.
IKE Client Command Set
3944