Ike Policy Command Set - ADTRAN AOS Version R10.1.0 Command Reference Manual

Command Reference Guide
IKE P C
OLICY
To activate the Internet Key Exchange (IKE) Policy mode, enter the crypto ike policy command at the
Global Configuration mode prompt. For example:
>enable
#configure terminal
(config)#crypto ike policy 1
(config-ike)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
cross-connect on page 67
do on page 71
end on page 72
exit on page 73
interface on page 74
All other commands for this command set are described in this section in alphabetical order.
attribute <number> on page 3956
client authentication host on page 3957
client authentication host xauth-type on page 3958
client authentication server list <listname> on page 3959
client configuration pool <name> on page 3960
initiate on page 3961
local-id on page 3963
nat-traversal on page 3965
peer on page 3966
respond on page 3968
For virtual private network (VPN) configuration example scripts, refer to the VPN
configuration guide located on the AOS Documentation CD provided with your unit.
60000CRG0-35E
S
OMMAND ET
Copyright © 2012 ADTRAN, Inc.

IKE Policy Command Set

3955