Table of Contents
Advertisement
Command Reference Guide
authentication
Use the authentication command to configure this Internet key exchange (IKE) policy's use of preshared
secrets and signed certificates during IKE negotiation. Use the no form of this command to disable this
feature. Variations of this command include:
authentication dss-sig
authentication pre-share
authentication rsa-sig
Syntax Description
dss-sig
pre-share
rsa-sig
Default Values
By default, authentication is set to pre-share.
Command History
Release 4.1
Release 5.1
Functional Notes
Both sides must share the same preshared secret in order for the negotiation to be successful.
Usage Examples
The following example enables preshared secrets for this IKE policy:
(config-ike)#attribute 10
(config-ike-attribute)#authentication pre-share
60000CRG0-35E
Specifies to use DSS-signed certificates during IKE negotiation to validate
the peer.
Specifies the use of preshared secrets during IKE negotiation to validate the
peer.
Specifies to use RSA-signed certificates during IKE negotiation to validate
the peer.
Command was introduced.
Command was expanded to include the signed certificates.
Copyright © 2012 ADTRAN, Inc.
IKE Policy Attributes Command Set
3949
Advertisement
Table of Contents
