ADTRAN AOS Version R10.1.0 Command Reference Manual page 3947

Command Reference Guide
netbios-name-server <ip address> <secondary>
Use the netbios-name-server command to specify the network basic input/output system (NetBIOS)
Windows Internet Naming Service (WINS) name servers to assign to a client. Use the no form of this
command to remove assigned name servers. Variations of this command include:
netbios-name-server <ip address>
netbios-name-server <ip address> <secondary>
Syntax Description
<ip address>
<secondary>
Default Values
By default, no WINS server address is defined.
Command History
Release 4.1
Usage Examples
The following example defines two WINS server addresses for this configuration pool:
(config)#crypto ike client configuration pool ConfigPool1
(config-ike-client-pool)#netbios-name-server 172.1.17.1 172.1.17.25
60000CRG0-35E
Specifies the primary WINS server IP address to assign.
Optional. Specifies the secondary WINS server IP address to assign.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
IKE Client Command Set
3947