ADTRAN AOS Version R10.1.0 Command Reference Manual page 3958

Command Reference Guide
client authentication host xauth-type
Use the client authentication host xauth-type command to allow the user to specify the Xauth
authentication type if a type other than generic is desired. Use the no form of this command to return to the
default setting. Variations of this command include:
client authentication host xauth-type generic
client authentication host xauth-type otp
client authentication host xauth-type radius
Syntax Description
generic
otp
radius
Default Values
By default, authentication is set to generic.
Command History
Release 5.1
Functional Notes
This command is used along with the client authentication host username. Refer to
pool <name> on page 3960
user to specify the Xauth authentication type if a type other than generic is desired.
Usage Examples
The following example sets the Xauth type to radius:
(config)#crypto ike policy 1
(config-ike)#client authentication host xauth-type radius
60000CRG0-35E
Specifies generic authentication type.
Specifies one time password (OTP) authentication type.
Specifies remote authentication dial-in user service (RADIUS)
authentication type.
Command was introduced.
for more information. When acting as an Xauth host, this command allows the
Copyright © 2012 ADTRAN, Inc.
IKE Policy Command Set
client configuration
3958