Frame-Relay Fragment - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

frame-relay fragment

Syntax
Release Information
Description
Options
Mode
638
frame-relay fragment [ [ fragmentSize ] [ fragmentation-only ] | reassembly-only ]
no frame-relay fragment
Command introduced before JunosE Release 7.1.0.
Configures fragmentation and reassembly for the map class created with the map-class
frame-relay command. The no version stops fragmentation and/or reassembly on the
subinterface.
fragmentSize—Maximum payload size of a fragment in bytes; a number in the range
16–8188; default value is 52
fragmentation-only—Specifies fragmentation only
reassembly-only—Specifies reassembly only
Map Class Configuration
Copyright © 2010, Juniper Networks, Inc.