Frame-Relay Fragment - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
frame-relay fragment
Syntax
Release Information
Description
Options
Mode
638
frame-relay fragment [ [ fragmentSize ] [ fragmentation-only ] | reassembly-only ]
no frame-relay fragment
Command introduced before JunosE Release 7.1.0.
Configures fragmentation and reassembly for the map class created with the map-class
frame-relay command. The no version stops fragmentation and/or reassembly on the
subinterface.
fragmentSize—Maximum payload size of a fragment in bytes; a number in the range
16–8188; default value is 52
fragmentation-only—Specifies fragmentation only
reassembly-only—Specifies reassembly only
Map Class Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
