Frame-Relay Description - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

frame-relay description

Syntax
Release Information
Description
Options
Mode
636
frame-relay description name
no frame-relay description
Command introduced before JunosE Release 7.1.0.
Assigns a text description or an alias to a Frame Relay interface or subinterface. Use the
show frame-relay interface or show frame-relay subinterface command to display the
text description. The no version removes the description or alias.
name—Text string or alias of up to 80 characters for the Frame Relay interface or
subinterface
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.