Ipv6 Mld Apply-Oif-Map - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ipv6 mld apply-oif-map

Syntax
Release Information
Description
Options
Mode
1034
ipv6 mld apply-oif-map mapName
no ipv6 mld apply-oif-map
Command introduced before JunosE Release 7.1.0.
Applies the specified outgoing interface (OIF) map to the current interface. The no version
removes the outgoing interface map from the interface.
mapName—Name of the OIF map
Interface Configuration, Profile Configuration
Copyright © 2010, Juniper Networks, Inc.