Reset Acl Counter; Rule (In Basic Ipv4 Acl View) - H3C MSR 20-20 Command Reference Manual

2092 C 138: IP 4 ACL C
HAPTER V

reset acl counter

Syntax
View
Parameter
Description
Example

rule (in basic IPv4 ACL view)

Syntax
View
Parameter
C
ONFIGURATION OMMANDS
Table 545 Description on the fields of the display acl command
Field
rule 5 comment This rule is
used in eth 1
reset acl counter { acl-number | all | name acl-name }
User view
acl-number: IPv4 ACL number in the range 2000 to 4999, where:
2000 to 2999 for basic IPv4 ACLs
■
3000 to 3999 for advanced IPv4 ACLs
■
4000 to 4999 for Ethernet frame header ACLs
■
all: All IPv4 ACLs except for user-defined ACLs.
name acl-name: Specifies the name of the ACL, which is a case insensitive string
of 1 to 32 characters. It must start with an English letter and cannot be the English
word of all to avoid confusion.
Use the
reset acl counter
ACLs except for user-defined ACLs.
# Clear statistics about IPv4 ACL 2001.
<Sysname> reset acl counter 2001
# Clear statistics about IPv4 ACL flow.
<Sysname> reset acl counter name flow
rule [ rule-id ] { deny | permit } [ fragment | logging | source { sour-addr
sour-wildcard | any } | time-range time-name | vpn-instance vpn-instance-name ] *
undo rule rule-id [ fragment | logging | source | time-range | vpn-instance ] *
Basic IPv4 ACL view
rule-id: Basic IPv4 ACL rule number in the range 0 to 65534.
deny: Defines a deny statement to drop matched packets.
permit: Defines a permit statement to allow matched packets to pass.
Description
The description of ACL rule 5 is "This rule is used in eth 1."
command to clear statistics about specified or all IPv4