Display Acl - H3C MSR 20-20 Command Reference Manual

display acl

Syntax
View
Parameter
Description
Example
<Sysname> system-view
[Sysname] acl number 5000
[Sysname-acl-user-5000] description This acl is used in eth 0
display acl { acl-number | all | name acl-name }
Any view
acl-number: IPv4 ACL number in the range 2000 to 5999, where:
2000 to 2999 for basic IPv4 ACLs
■
3000 to 3999 for advanced IPv4 ACLs
■
4000 to 4999 for Ethernet frame header ACLs
■
5000 to 5999 for user-defined ACLs
■
all: All IPv4 ACLs.
name acl-name: Specifies the name of the ACL, which is a case insensitive string
of 1 to 32 characters. It must start with an English letter and cannot be the English
word of all to avoid confusion.
n
The MSR 20 Series Routers do not support the last range, that 5000 to 5999.
Use the display acl
IPv4 ACLs.
This command displays ACL rules in the order in which the system compares a
packet against them.
# Display information about IPv4 ACL 2001.
<Sysname> display acl 2001
Basic acl 2001, named flow, 1 rule,
Acl's step is 5
rule 5 permit source 1.1.1.1 0 (5 times matched)
rule 5 comment This rule is used in eth 1
Table 545 Description on the fields of the display acl command
Field
Basic acl 2001
named flow
1 rule
Acl's step is 5
5 times matched
command to display information about the specified or all
Description
The displayed information is about the basic IPv4 ACL 2001.
The name of the ACL is flow.
The ACL contains one rule.
The rules in this ACL are numbered in steps of 5.
Five matches for the rule. Only ACL matches performed by
software are counted.
This field appears as long as one match is found.
2091