Display Ospf Abr-Asbr - H3C S7500E Series Command Manual

Hide thumbs Also See for S7500E Series:

Table of Contents

Command Manual – IPv4 Routing

H3C S7500E Series Ethernet Switches

# Describe the OSPF area0 as bone area.

<Sysname> system-view

[Sysname] ospf 100

[Sysname-ospf-100] area 0

[Sysname-ospf-100-area-0.0.0.0] description bone area

3.1.10 display ospf abr-asbr

display ospf [ process-id ] abr-asbr

process-id: OSPF process ID, in the range 1 to 65535.

Use the display ospf abr-asbr command to display ABR/ASBR information.

If no process is specified, the ABR/ASBR information of all OSPF processes is

If you use this command on routers in a stub area, no ASBR information is displayed.

# Display ABR/ASBR information.

<Sysname> display ospf abr-asbr

Table 3-1 Description on the fields of the display ospf abr-asbr command

OSPF Process 1 with Router ID 192.168.1.2

Routing Table to ABR and ASBR

Intra-area router or Inter-area router

Router ID of an ABR/ASBR

ID of the area of the next hop

Cost from the router to the ABR/ASBR

Chapter 3 OSPF Configuration Commands

Table of Contents