View
Parameter
Description
Example
acl ipv6 name
Syntax
View
Parameter
System view
source-acl6-number: Number of an existing IPv6 ACL, which must be in the
following ranges (the available ACL number ranges varies by device):
2000 to 2999 for basic IPv6 ACLs
■
3000 to 3999 for advanced IPv6 ACLs
■
source-acl6-name: Name of an existing IPv6 ACL, a case insensitive string of 1 to
32 characters. It must start with an English letter and cannot be the English word
of all to avoid confusion.
dest-acl6-number: Number of a non-existent IPv6 ACL, which must be in the
following ranges (the available ACL number ranges varies by device):
2000 to 2999 for basic IPv6 ACLs
■
3000 to 3999 for advanced IPv6 ACLs
■
dest-acl6-name: Name for the new IPv6 ACL, a case insensitive string of 1 to 32
characters. It must start with an English letter and cannot be the English word of
all to avoid confusion. The system will automatically assign the new ACL a
sequence number which is the smallest one among the available ones in the ACL
range for the ACL type.
Use the
acl ipv6 copy
source IPv6 ACL) to generate a new one (namely, the destination IPv6 ACL), which
is of the same type and has the same match order, match rules, rule numbering
step and descriptions.
Note that:
The source IPv6 ACL and the destination IPv6 ACL must be of the same type.
■
The generated ACL does not take the name of the source IPv4 ACL.
■
A simple IPv6 ACL does not support this feature.
■
# Copy ACL 2008 to generate ACL 2009.
<Sysname> system-view
[Sysname] acl ipv6 copy 2008 to 2009
acl ipv6 name acl6-name
System view
acl6-name: Name of the IPv6 ACL, a case insensitive string of 1 to 32 characters. It
must start with an English letter and cannot be the English word of all to avoid
confusion.
command to copy an existent IPv6 ACL (namely, the
2105