Acl Ipv6 - H3C MSR 20-20 Command Reference Manual

acl ipv6

Syntax
View
Parameter
Description
139
IP 6 ACL C
V
C
OMMANDS
acl ipv6 number acl6-number [ name acl6-name ] [ match-order { auto | config } ]
undo acl ipv6 { all | name acl6-name | number acl6-number }
System view
acl6-number: IPv6 ACL number. It is a value in one of the following ranges:
2000 to 2999 for basic IPv6 ACLs
■
3000 to 3999 for advanced IPv6 ACLs
■
10000 to 42767 for simple IPv6 ACLs
■
name acl6-name: Specifies the name of the ACL, which is a case insensitive string
of 1 to 32 characters. It must start with an English letter and cannot be the English
word of all to avoid confusion.
match-order: Sets the order in which ACL rules are matched.
auto: Performs depth-first match. For how depth-first match works, refer to
■
the "IPv6 ACL Match Order" section in accompanied ACL Configuration.
config: Performs matching against rules in the order in which they are
■
configured.
all: All IPv6 ACLs.
Use the command to enter IPv6 ACL view. If the ACL does not exist, it is
acl ipv6
created first.
Use the
undo acl ipv6
By default, the match order is config.
Note that:
The match order setting is not available for simple IPv6 ACLs, because a simple
■
IPv6 ACL can contain only one rule.
ONFIGURATION
command to remove a specified or all IPv6 ACLs.
2103