Display Ospf Abr-Asbr - H3C s3600 series Command Manual

Related commands: router id.
Examples
# Display the router ID.
<Sysname> display router id
Configured router id is 1.1.1.1

display ospf abr-asbr

Syntax
display ospf [ process-id ] abr-asbr
View
Any view
Parameters
process-id: OSPF process ID, in the range of 1 to 65535. If you do not specify a process ID, this
command applies to all current OSPF processes.
Description
Use the display ospf abr-asbr command to display the information about the ABR and ASBR of OSPF.
If you use this command on routers in a stub area, no ASBR information is displayed.
Examples
# Display the information about the OSPF ABRs and ASBRs.
<Sysname> display ospf abr-asbr
Routing Table to ABR and ASBR
I = Intra i = Inter A = ASBR B = ABR S = SumASBR
Destination
IA 2.2.2.2
Table 4-1 Description on the fields of the display ospf abr-asbr command
I = Intra i = Inter
A = ASBR B = ABR S = SumASBR
Destination
Area
Cost
OSPF Process 1 with Router ID 1.1.1.1
Area Cost
0.0.0.0 10
Field
Nexthop Interface
10.153.17.89 Vlan-interface1
Description
Type of the route to the ABR or ASBR:
Intra: intra-area route
Inter: Inter-area route
ASBR: Route to the ASBR
ABR: Route to the ABR
SumASBR: Summary route to the ASBR
Router ID of the ABR or ASBR
Area where the router is connected to the ABR or ASBR
Cost of the route from the local router to the ABR or ASBR
4-8