Restoring The Factory Settings; Scenario 1; Scenario 2; Scenario 3 - H3C MSR 930 Installation Manual

Restoring the factory settings

Scenario 1

Symptom
When you replace the router, the router password is lost. As a result, you cannot log in to the
router and do not know the router configuration.
Solution
Because the router is replaced, you do not need to save the configuration of the router. In this case,
you can press the Reset button for more than 4 seconds to reboot the router and restore the
factory settings. Then, you can use the username and password shipped with the router to log in to
the router.
When the router configuration must be saved and you have a console cable, you can log in to the
router from the BootWare menu.

Scenario 2

Symptom
After the configuration is modified, the network connectivity is lost. When you check the
configuration, the configuration is very complicated and it is hard to locate the errors. In this case,
you must configure the router again.
Solution
If you have not saved any configuration, you can reboot the router by pressing the Reset button for
a short time or power off the router.
If you have saved the configuration, delete the configuration file at the CLI, and press the Reset
button to restore the factory settings.

Scenario 3

Symptom
The router crashes.
Solution
Press the Reset button for a short time to reboot the router.

Reset button usage guidelines

An MSR 930 router provides the Reset button. You can use the button to reboot the system or
restore the factory settings.
•
Press the Reset button for a short time to reboot the router.
•
Press the Reset button for more than 4 seconds to reboot the router and restore the factory
settings.
30