Reserved Vxlan; Reset Arp Suppression Vsi - H3C MSR 810 Command Reference Manual

Fragmentation is disabled for a VSI that uses the default MTU. If you set a MTU for a VSI, the
packets longer than the MTU are fragmented.
Examples
# Set the MTU to 1400 bytes for VSI vxlan1.
<Sysname> system-view
[Sysname] vsi vxlan1
[Sysname-vsi-vxlan1] mtu 1400
Related commands
display l2vpn vsi

reserved vxlan

Use
reserved vxlan
Use
undo reserved vxlan
Syntax
reserved vxlan vxlan-id
undo reserved vxlan
Default
No VXLAN has been reserved.
Views
System view
Predefined user roles
network-admin
Parameters
: Specifies a VXLAN ID in the range of 0 to 16777215.
vxlan-id
Usage guidelines
You can specify only one reserved VXLAN on the VTEP. The reserved VXLAN cannot be the VXLAN
created on any VSI.
The reserved VXLAN ID cannot be the same as the remote VXLAN ID specified by using the
mapping vni
Examples
# Specify VXLAN 10000 as the reserved VXLAN.
<Sysname> system-view
[Sysname] reserved vxlan 10000
Related commands
mapping vni

reset arp suppression vsi

Use
reset arp suppression vsi
Syntax
reset arp suppression vsi [ name vsi-name ]
to specify a reserved VXLAN.
to restore the default.
command.
(EVPN Command Reference)
to clear ARP flood suppression entries on VSIs.
19