Reset L2Vpn Mac-Address; Reset L2Vpn Statistics Ac - H3C CR16000-F Command Reference Manual

•
Advertisement through by BGP EVPN.
Do not configure static remote-MAC entries for VXLAN tunnels that are automatically established by
using EVPN.
•
EVPN re-establishes VXLAN tunnels if the transport-facing interface goes down and then
comes up. If you have configured static remote-MAC entries, the entries are deleted when the
tunnels are re-established.
•
EVPN re-establishes VXLAN tunnels if you perform configuration rollback. If the tunnel IDs
change during tunnel re-establishment, configuration rollback fails, and static remote-MAC
entries on the tunnels cannot be restored.
For more information about EVPN, see EVPN Configuration Guide.
Examples
# Add MAC address 000f-e201-0101 to VSI vsi1. Specify Tunnel-interface 1 as the outgoing
interface.
<Sysname> system-view
[Sysname] mac-address static 000f-e201-0101 interface tunnel 1 vsi vsi1
Related commands
vxlan tunnel mac-learning disable

reset l2vpn mac-address

Use reset l2vpn mac-address to clear dynamic MAC address entries on VSIs.
Syntax
reset l2vpn mac-address [ vsi vsi-name ]
Views
User view
Predefined user roles
network-admin
Parameters
vsi vsi-name : Specifies a VSI by its name, a case-sensitive string of 1 to 31 characters. If you do
not specify a VSI, this command clears all dynamic MAC address entries on all VSIs.
Usage guidelines
Use this command when the number of dynamic MAC address entries reaches the limit or the device
learns incorrect MAC addresses.
Examples
# Clear the dynamic MAC address entries on VSI vpn1.
<Sysname> reset l2vpn mac-address vsi vpn1
Related commands
display l2vpn mac-address vsi

reset l2vpn statistics ac

Use reset l2vpn statistics ac to clear packet statistics on ACs.
21