JunosE 11.3.x Command Reference Guide A to M
frame-relay lmi-n392dte
Syntax
Release Information
Description
Options
Mode
644
frame-relay lmi-n392dte threshold
no frame-relay lmi-n392dte
Command introduced before JunosE Release 7.1.0.
Sets the error threshold counter (N392) on a DTE interface. The no version removes
current setting and sets the default.
threshold—Positive number in the range 1–10; number of errors that will place the
interface in an operationally down state; default value is 3 errors
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.