Display Posa Connection Terminal - H3C MSR Series Manual

Parameters
text: Specifies a description, a case-sensitive string of 1 to 32 printable characters except question marks
(?).
Examples
# Create a TCP-based POS application template and set the description as ChinaBank1.
<Sysname> system-view
[Sysname] posa app 1 type tcp
[Sysname-posa-app1] description ChinaBank1

display posa connection terminal

Use display posa connection terminal to display connection information for TCP-based POS terminals.
Syntax
display posa connection terminal [ terminal-id ]
Views
Any view
Default command level
network-admin
network-operator
Parameters
terminal-id: Specifies a POS terminal template by its ID, in the range of 1 to 255. If no terminal template
is specified, the command displays connection information for all TCP-based terminals.
Examples
# Display connection information for all TCP-based terminals.
<Sysname> display posa connection terminal
TerminalID
1
1
5
5
Table 1 Command output
Field
TerminalID
SourceIP
SourcePort
DestinationPort
DestinationIP
SourceIP SourcePort
192.168.100.1 1319
192.168.100.1 1320
192.168.100.2 1323
192.168.100.2 1324
Description
ID of the POS terminal template.
Source IP address of the connection.
Source port of the connection.
Destination port of the connection.
Source IP address of the connection.
DestinationPort
3000
3000
4000
4000
3
DestinationIP
192.168.100.236
192.168.100.236
192.168.100.236
192.168.100.236