Ipv6 Default-Route-Advertise - H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Interface
IPV6 Dest
Preference : 15
Interface
IPV6 Dest
Preference : 15
Interface
IPV6 Dest
Preference : 15
Interface
Flags: R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
Table 4-2 Description on the fields of the display isis route ipv6 verbose command
Field
IPV6 Dest
Cost
Flag/Flags
Admin Tag
Src Count
Next Hop
Interface

4.1.2 ipv6 default-route-advertise

Syntax
ipv6 default-route-advertise [ [ level-1 | level-2 | level-1-2 ] | route-policy
route-policy-name ]*
undo ipv6 default-route-advertise [ route-policy route-policy-name ]
View
IS-IS view
: Vlan100
: 2001:2::/64
: Vlan100
: 2001:3::/64
: Vlan100
: ::/0
: Vlan100
IPv6 destination address
Value of cost
Flag of routing information status
D: This is a direct route.
R: The route has been added into the routing table.
L: The route has been advertised in an LSP.
U: Route leaking flag, indicating the Level-1 route is from
Level-2. "UP" means the route will not be returned to Level-2.
Administrative tag
Number of advertisement sources
Next hop
Outbound interface
Chapter 4 IPv6 IS-IS Configuration Commands
Next Hop : Direct
Cost : 20
Admin Tag : -
Next Hop : FE80::2E0:FCFF:FE00:242A
Cost : 20
Admin Tag : -
Next Hop : FE80::2E0:FCFF:FE00:242A
Cost : 10
Admin Tag : -
Next Hop : FE80::2E0:FCFF:FE00:242A
Description
4-3
Flag : R/-/-
Flag : R/-/-
Flag : R/-/-