Vxlan Ip Gateway Commands; Arp Distributed-Gateway Dynamic-Entry Synchronize; Bandwidth - H3C MSR 810 Command Reference Manual

encapsulation
vsi

VXLAN IP gateway commands

arp distributed-gateway dynamic-entry synchronize

Use
arp distributed-gateway dynamic-entry synchronize
entry synchronization for distributed VXLAN IP gateways.
Use
undo arp distributed-gateway dynamic-entry synchronize
ARP entry synchronization for distributed VXLAN IP gateways.
Syntax
arp distributed-gateway dynamic-entry synchronize
undo arp distributed-gateway dynamic-entry synchronize
Default
Dynamic ARP entry synchronization is disabled for distributed VXLAN IP gateways.
Views
System view
Predefined user roles
network-admin
Usage guidelines
When local proxy ARP is enabled on distributed VXLAN IP gateways, each gateway learns ARP
information independently. A gateway does not forward ARP packets destined for its local VSI
interfaces to other gateways. For distributed VXLAN IP gateways to have the same ARP entries, you
must enable dynamic ARP entry synchronization.
A controller or the EVPN feature can also synchronize ARP entries among distributed VXLAN IP
gateways. When you use a controller or the EVPN feature, do not enable dynamic ARP entry
synchronization.
Examples
# Enable dynamic ARP entry synchronization for distributed VXLAN IP gateways.
<Sysname> system-view
[Sysname] arp distributed-gateway dynamic-entry synchronize
Related commands
distributed-gateway local
local-proxy-arp enable

bandwidth

Use
bandwidth
Use
undo bandwidth
Syntax
bandwidth bandwidth-value
(Layer 3—IP Services Command Reference)
to set the expected bandwidth for a VSI interface.
to restore the default.
35
to enable dynamic ARP
to disable dynamic