Configuring Chap Authentication (Authenticator Name Is Configured) - H3C SR8800-F Configuration Manual

Step
2. Enter interface view.
3. Configure the PAP username
and password sent from the
peer to the authenticator
when the peer is
authenticated by the
authenticator by using PAP.
Configuring CHAP authentication (authenticator name is
configured)
To configure the authenticator:
Step
1. Enter system view.
2. Enter interface view.
3. Configure the authenticator
to authenticate the peer by
using CHAP.
4. Configure a username for
the CHAP authenticator.
5. Configure local or remote
AAA authentication.
To configure the peer:
Step
1. Enter system view.
2. Enter interface view.
Command
interface interface-type
interface-number
ppp pap local-user username
password { cipher | simple }
string
Command
system-view
interface interface-type
interface-number
ppp authentication-mode
chap [ domain { isp-name |
default enable isp-name } ]
ppp chap user username
For local AAA authentication,
the username and password of
the peer must be configured on
the authenticator.
For remote AAA authentication,
the username and password of
the peer must be configured on
the remote AAA server.
For more information about AAA
authentication, see "Configuring
AAA."
Command
system-view
interface interface-type
interface-number
235
Remarks
N/A
By default, when being
authenticated by the authenticator
by using PAP, the peer sends null
username and password to the
authenticator.
For security purposes, the
password specified in plaintext
form and ciphertext form will be
stored in encrypted form.
Remarks
N/A
N/A
By default, PPP authentication is
disabled.
The default setting is null.
The username you configure for the
authenticator must be the same as
the local username you configure for
the authenticator on the peer.
The username configured for the peer
must be the same as that configured
on the peer.
The passwords configured for the
authenticator and peer must be the
same.
Remarks
N/A
N/A