Info-Center Channel Name - H3C SR6600 Command Reference Manual

Use undo enable log updown to disable a port from generating link up/down logs when the port state
changes.
Syntax
enable log updown
undo enable log updown
Default
All the ports are allowed to generate port link up/down logs when the port state changes.
Views
Interface view
Default command level
2: System level
Examples
# Disable port GigabitEthernet2/0/1 from generating link up/down logs.
<Sysname> system-view
[Sysname] interface gigabitethernet2/0/1
[Sysname-GigabitEthernet2/0/1] undo enable log updown

info-center channel name

Use info-center channel name to name a channel.
Use undo info-center channel to command to restore the default name for a channel.
Syntax
info-center channel channel-number name channel-name
undo info-center channel channel-number
Default
See Table 43
Views
System view
Default command level
2: System level
Parameters
channel-number: Specifies a channel by its number in the range of 0 to 9.
channel-name: Specifies a name for the channel, a case-insensitive string of 1 to 30 characters. It must
be a combination of letters and numbers and start with a letter.
Examples
# Name channel 0 as abc.
<Sysname> system-view
[Sysname] info-center channel 0 name abc
for information about default channel names and channel numbers.
212