Install Vm-Name - H3C MSR 810 Command Reference Manual

Syntax
export vm vm-name pkg-path
Views
VMM view
Predefined user roles
network-admin
Parameters
: Specifies a VM by its name. The
vm-name
characters.
: Specifies the absolute path of the .pkg file, a case-sensitive string of 1 to 63 characters.
pkg-path
Usage guidelines
Make sure you have access permissions to the target path and the target path has sufficient storage
space.
If the .pkg file is saved on a USB flash drive, make sure the file system format of the USB flash drive
is EXT4.
You must stop a VM by using the
Examples
# Export VM centos7 to hda0:/.
<Sysname> system-view
[Sysname] vmm
[Sysname-vmm] export vm centos7 hda0:/centos7.pkg

install vm-name

Use
install vm-name
Syntax
In passthrough mode:
install vm-name vm-name vcpu vcpu-count memory size vncport vncport disk
disk-file format { raw | qcow2 } disk-bus { ide | virtio } [ cdrom cdrom-file ]
[ vnic { vtap [ mac mac-address ] [ vlan vlan-id ] | sriov pf pfid } ]
In SR-IOV share mode:
install vm-name vm-name vcpu vcpu-count memory size vncport vncport disk
disk-file format { raw | qcow2 } disk-bus { ide | virtio } [ cdrom cdrom-file ]
[ vnic { vtap [ mac mac-address ] [ vlan vlan-id ] | sriov pf pfid vf vfid
[ vlan vlan-id ] } ]
Views
VMM view
Predefined user roles
network-admin
Parameters
vm-name vm-name
of 1 to 30 characters.
stop vm
to install a VM based on the specified parameters.
: Specifies a VM by its name. The
argument is a case-sensitive string of 1 to 30
vm-name
command before you can export it.
argument is a case-sensitive string
vm-name
20